Hot Flo
PDF Print E-mail

Hot Flo

Convenience takes on a new meaning with our innovatively-designed water heaters. Now, everyone in the family can have clean and hot water, on demand, just about anywhere in your home - with the installation of the Multi-Point Tankless Instant Water Heater.

Electric Tankless On-Demand Instant Water Heater is specially designed to supply hot water with maximum efficiency and reliability. You can enjoy hot from any mixer tap at your home for shower, wash basin, bath tub, Jacuzzi, kitchen sink and washing machine.

 Multi-point diagram 

Water is saved as there is minimal cold water initial run-off common with storage water heaters, due to its ‘On-Demand’ - ‘Instant Water Heating’ and shorter piping to the point of use. Installation costs are lower due to shorter copper pipe required.
 

Features

Features

- High Temperature Insulation Sleeves for Wires
- Double Thermostats for Extra Thermal Safety
- High Temperature Terminal Block
- Stainless Steel Filter
- Extra-Safe Double Relay ELCB
- Easy to Operate
- Automatic Flow Switch Prevents Element Burn-out
- Copper-Tube Heat Exchanger
High Temperature Insulation Sleeves for Wires
The high temperature sleeves provide protection against abnormal heat and serve as added electrical insulation.
Double Thermostats for Extra Thermal Safety
The unit has 2 thermal cut-outs. The first thermal cut-out will switch off the heater element if the water flow is reduced. The second Hi-Temp Back-up Thermal Cut-out will only operate under exceptional abnormal condition to protect the appliance from over heating.
High Temperature Terminal Block
Internationally cerfified high temperature material used. (VDE, CE, DEMKO, UL)
Extra-Safe Double Relay ELCB
The intelligent micro-controller Double Relay ELCB not only cuts off current leakage but also protects against electrical surge.
Easy to Operate
Power ON & OFF using these pushing-buttons for easy operation.
Automatic Flow Switch Prevents Element Burn-out
This is to detect water flow; the water heater will only operate if the water is flowing.
Copper-Tube Heat Exchanger
The water flow inside the copper-tube will be heated up by the heating element.

Specifications

Specifications

Power Rating : 4.5, 6.0, 7.0, 8.0, 9.0Kw
Volt : 240V a.c ~ 50 Hz
Min. Flow to turn on : 2L/min
Min. Water Pressure : 14kPa (2 psi)
Max. Water Pressure : 380kPa (55 psi)
Water Connection : 15 mm(1/2"BSP)
Water Temp. Control : Variable Stepless Electronic Control
Product Dimension : 298mm x 196mm x 102m
Gross Weight : 2.2kg
Colour Available : White

alt