When it comes to storage heater tank design,none can surpass Beebest's indelible high mark of excellence. Beebest Electric Storage Water Heater saves space and money. It can be easily installed and concealed in the ceiling to save space. Incoming water is directed through the heater for heating. Its centralized multipoint system provides you with hot water at every tap. So, with Beebest Electric Storage Water Heater, you can enjoy hot water anytime, anywhere and simply more cost saving.
Centralized Multipoint System
Now, you can enjoy hot water at every tap of your home for bath, cooking or washing. Beebest Storage Tank Water Heater is specially designed to supply and store your hot water with maximum effiiciency and reliability.
Enamel Coating Inner Tank
What is ENAMEL?
Enamel, is a material made by fusing powdered glass to a substrate by high temperature, usually between 850'C (1560'F). The powder melts, flows, and then hardens to a smooth, durable permanent 0.5mm enamel coating on the metal. The fired enameled ware is a fully laminated composite of glass and metal bonding.
The 0.5mm enamel coating on storage water heater is a latest technology to prevent corrosion while the water flows into inner tank to ensure the inner tank against rusty therefore, the tank will have a much longer life span.
Uses 2mm Cold Rolled Steel (CRS) as raw material in Inner tank production
Enamel Inner Tank
with Exclusive Single Welded Line Design
Provides several times the corrosion resistance and anti-rust effects compared to standard inner tank designs.
Single welded line on the inner tank, reduces over 70% chances of water leakage.
Superior long life span. Passed multiple testing including : Acid uric test : Tested Pass Anti-alkaline test : Tested Pass Fatigue test : 0.8Mpa/ 8 Bars/ 116 P.S.I. 300,000 times cycle tested. (UL Standard : only 100,000 times.
Single welded joint design, reduces water leakage risk and 5years warranty for inner tank
Cold Rolled Steel (CRS), high quality 2mm thickness material, can withstand higher temperature & stroner water pressure
Beebest Enamel coating 0.5mm inner tank
Fully Tested Approved & Certified by SIrim & Suruhanjaya Tenaga
Heating element are made of lncoloy material, longer lifespan : can withstand hard water, higher temp. & corrosion
Magnesium anode to purify water and prevent heating element from corrosion
Thicker Polyurethane (PUF) insultion layer, to prevent heat loss & conserve energy saving
Double Thermostats for Extra Thermal Cut-Off Safety, The first thermal cut-out will switch off the heater element if the water flow is reduced and temperature increase.The second thermal cut-off will switch off the heater element when the temp. exceding 90'C due to un-normal condition
Special "U" bracket for easy installation, Suitable for wall, floor & ceiling mounting
2 way safety valve : To release water when pressure too high to prevent excessive pressure build-up inside tank to avoid explosion To prevent water backflow out from tank to avoid dry heating element inside tank
All the parts can be recycled, environment friendly